We offer
European style frameless boxes available in white,
grey, black and almond colors.
Simple onsite assembly and fast delivery times will
make your project easy and cost effective. We provide
standard and custom sizes.
Our approach to cabinet case construction incorporates
the best features of European frameless construction
and 32mm borings, with the American modular dimensional
system.
Frameless Construction
Cabinet cases are designed for true frameless
construction. The case bottom, top and sides are constructed
of full-thickness (5/8" or 3/4") materials,
per your specification. In addition:
- Select from stock melamine colors. Or specify from
a wide range of panel finishes.
- Select your edge finish from a wide variety of PVC's
and hardwood veneers.
- All parts are cut to size, drilled, milled and dadoed
as required, ready for assembly.
- Two Assembly Methods:
(1) Confirmat ® screws with hardwood alignment
dowels inserted, or
(2) Hardwood 8mm x 30mm dowels factory inserted. (glue
and clamping required)
- Box ends are line-drilled with 5mm diameter holes
on 32mm centers to accommodate adjustable shelf clips
and/or 32mm European-style hardware.
- All boxes have full tops and bottoms. (Except sink
bases)
- Backs (1/4") are dadoed into ends, tops
and bottoms, to be fully housed after box assembly.
- Boxes for drawers have one front rail under the
top drawer position.
- Sink boxes have one back rail and one front rail
or sub-apron, as required by the box type.
- Sink boxes milled for a Tilt-Out-Sink-Tray
have a top sub-apron (1-3/4" wide) and one drawer
rail.
In addition to cabinet boxes we can supply drawer boxes,
rollout shelves, adjustable shelves, (supplied with
shelf clips), fixed shelves, Closet/Storage/Organizer
systems and functional hardware.
32mm Boring Patterns
All of our components, including sides, tops,
bottoms and drawer parts are bored on 32mm centers.
This assures you of the greatest flexibility in adding
hardware, such as hinge blocks, drawer guides and studs
for KD shelves. Since the holes are already bored, these
hardware items can be assembled to the case component
while still "in-the-flat" prior to making
up the case. Errors and exceptions to the hardware attachment
job are all but eliminated since all boring is modular
in location, and referenced from a standard datum. This
means that field assembly and rework time is dramatically
reduced. Drawers fit, doors hang true and shelf spacing
is widely adjustable.
American Modular System
Adapting European frameless construction and
32mm boring patterns to American modular dimensions
is the final part of our system.
All of our cases are dimensioned according to American
standards. For example, a "W1830" is a wall
cabinet, 18 inches wide, 30 inches high, with a standard
depth of 11-3/4"; standard base boxes are 30-1/2"
high and 23-3/4" deep.
Customized Boxes
In addition to the 1,500 standard configurations
and sizes we will manufacture non-standard boxes to
fit your particular situation. Customized boxes are
priced on request. |
